€1,350.00
Vendor: Internal Doors

The Palladio Composite Doors Single


The Palladio Door Collection begins its life as a real timber door, we place a gel mould over the timber door and transfer that grain detail onto the Palladio Door range. Each door has a renolit foil finish (NOT painted) which means that not only does each door have an impeccable appearance it is paired with durability.

Warmth

All palladio doors are double rebated. That means that you have to secure seals on the door that are guaranteed to keep out any wind or rain that the irish climate can nthrow at it. The solid part of the door leaf has been tested to achieve a u value of 0.205 and the combined u value of the triple glazed door is 0.98

Security

As you will see from the video test on the door, the palladio door is extremely strong.In addition all doors feature an 8 point hook locking system with a dead latch. The locking system is pas 23/24 approved and secured by design approved.

Security As you will see from the video test on the door, the palladio door is extremely strong.In addition all doors feature an 8 point hook locking system with a dead latch. The locking system is pas 23/24 approved and secured by design approved.



Price Includes:

  • Palladio Composite Door
  • Lever Lever Handle
  • 77mm uPVC Full Frame Threshold

 

 

    • Optional Extras coated separately 

      • Letter Box 
      • Knocker 
      • Docker Knocker 
      • Brass Knob 
      • Chrome Knob 
      • Numerals 
      • 1200mm Pull Bar 
      •  600mm Curved Handle 
      • Security Cylinder
      • Round escutcheon, lock & thumb turn 
      • Same colour inside and outside 
      • Low Aluminium/Stormguard Threshold 

         

         

        How to measure a double glazed door

        Width

        The width should be measured brick to brick at three points - top, middle and bottom of the opening. The smallest of these measurements is taken as the width. 

         

         

        Height

        The height should be measured brick to brick at three points - left, middle and right of the opening. The smallest of these measurements is taken as the height. 

         

        Door measurements

        When measuring your existing door aperture check the inside measurements against the outside measurements to check the frame will clear the inside plaster line as shown below